Ana səhifə / Məhsullar / Hikvision / Switch / Switch DS-3E1326P-EI/M

Switch DS-3E1326P-EI/M

main

Haqqında

DS-3E1326P-EI/M 24 Port Fast Ethernet Smart PoE Switch

  • 24 × 10/100M PoE ports, 1 × Gigabit combo,1 × Gigabit RJ45 port
  • Total PoE Power Budget 230 W
  • Support 802.1Q VLAN
  • Support PoE watchdog to detect and restart the cameras that do not respond
  • Support STP/RSTP Loop prevention
  • Up to 300 m Long Range PoE Transmission
  • 6 kV Surge Protection
Port Sayi 24 Port
Port sürəti 100mbp/s
PoE PoE
PoE gücü 250 W
Tip Unmanaged

Ətraflı

Model DS-3E1326P-EI/M
Shell Metal Material
Power Supply 100-240 VAC, 50/60 Hz, Max. 4 A
Installation Mode Rack (equipped with mounting ears)
Max. Power Consumption 250 W 
Power Consumption in Idle 20 W 
Surge Protection 6 KV 
Ports 24 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port 
MAC Address Table 16 K 
Switching Capacity

Whole-Device Performance: 14.8 Gbps

Port Performance: 8.8 Gbps

Packet Forwarding Rate

Whole-Device Performance: 11.01 Mpps

Port Performance: 6.55 Mpps

Internal Cache 4 Mbits 
PoE Standard IEEE 802.3af,IEEE 802.3at 
PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) 
PoE Port PoE: Ports 1 to 24 
Max. Port Power 30 W 
PoE Power Budget 230 W 
Long Range

Ports 1 to 24: up to 300 m

Long range performance may vary depend on camera model or cable condition

VIP Port Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient 
Port Isolation

Ports 1 to 24: port isolation mode to improve network security

Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group

PoE Watchdog Ports 1 to 24: auto detect and restart the cameras that do not respond 
HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

1. Display the port rate

2. Display the port bandwidth utilization rate

3. Display the PoE power usage

4. Display topology information

5. Display the alarm status

6. Restart ports and devices

7. Enable port long-rage mode

8. Remotely upgrade the device

System Maintenance

Support device management via web

Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses

Support Super IP, which is a fixed IP address (10.180.190.200) for direct access

Support management via Hik-Central Pro

Support remote management via Hik-Partner Pro

Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected

Supports 802.1ab LLDP for peer device discovery

Support port mirroring for fault locating

EMC

CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)

Safety

CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017)

Chemistry

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Qiymət
458 azn
Stokda sayı
22 ədəd