Unmanaged PoE switch, 4* 10/100M PoE ports+2* 10/100M uplink RJ45 ports
Port Sayi | 4 Port |
Port sürəti | 100mbp/s |
PoE | PoE |
Tip | Unmanaged |
Model |
JHA-P10204CBMHGW |
Interface Characteristics |
|
Fixed Port |
4*10/100Base-TX PoE ports (Data/Power) 2*10/100Base-TX uplink RJ45 ports (Data) |
Ethernet Port |
Port 1-6/1-10 can support 10/100Base-TX auto-detection, full/half-duplex MDI/MDI-X auto-sensing |
Functional Switch
|
1*(Extend+ VLAN) |
Note: when the switch state changes, it must be restarted before the PoE switch function can take effect |
|
Twisted Pair Transmission |
10BASE-TX: Cat5 or later UTP(≤250 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) |
Chip Parameter |
|
Network Protocol |
IEEE802.3 10BASE-T, IEEE802.3i 10Base-T IEEE802.3u 100Base-TX,IEEE802.3x |
Forwarding Mode |
Store and Forward(Full Wire Speed) |
Switching Capacity |
1.6Gbps (Non-blocking) |
Forwarding Rate@64byte |
0.98Mpps |
MAC |
1K |
Buffer Memory |
768K |
Jumbo Frame |
9.6K |
LED Indicator |
Power:PWR (Green), network: L/A(Yellow), PoE: PoE (Green) Functional switch: EXTEND (Green) |
PoE & Power Supply |
|
PoE Port |
Port 1-4 |
Power Supply Pin |
Default 1/2(+), 3/6(-) |
Max Power Per Port |
30W, IEEE802.3af/at |
Total PWR / Input Voltage |
65W/ (AC100-240V) |
Power Consumption |
Standby<3W, Full load <65W |
Power Supply |
Built-in power supply, AC100~240V 50-60Hz 1A |
Physical Parameter |
|
Operation TEMP / Humidity |
-20~+55°C, 5%~90% RH Non condensing |
Storage TEMP / Humidity |
-40~+75°C, 5%~95% RH Non condensing |
Dimension (L*W*H) |
140*115*40mm |
Net /Gross Weight |
|
Installation |
Desktop, wall-mounted |
Certification & Warranty |
|
Lightning Protection / Protection Level |
Lightning protection: 4KV 8/20us; Protection level: IP30 |
Certification |
CCC, CE mark, commercial, CE/LVD EN60950 FCC Part 15 Class B, RoHS |