TP-Link Access Point СPE610
СPE610 5GHz 300Mbps 23dBi Outdoor Wifi Access Point
Wi-Fi speeds up to 300 Mbps at 5 GHz
2x2 MIMO 23 dBi high gain directional antenna and metal shielding for long distance data transmission
Excellent beam directivity, less delays and interference
Innovative locking mechanisms for quick assembly and a robust design make the CPE610 stable even in strong winds.
The all-weather IP65 enclosure, electrostatic discharge protection up to 15 kV and lightning strike protection up to 6 kV ensure operation in all atmospheric conditions.
TP-LINK Pharos MAXtream TDMA technology (TDMA - multiple access with time division) improves the throughput and performance of the device, reduces latency
Pharos Control – A free, centralized network management application
Passive PoE technology for easy installation of devices
Detailed
| Hardware Specifications | |
|---|---|
| Processor | Qualcomm 560 MHz, MIPS 74Kc |
| Memory | RAM-64 MB DDR2 Flash-8 MB |
| Interfaces | 1 10/100 Mbps shielded Ethernet (LAN/PoE) port 1 Reset button |
| Power supply | Passive PoE over LAN ( + : pins 4,5; -: pins 7,8) Voltage range: 16-27 VDC |
| Power consumption | 7.41 W Note: When using Passive PoE, the power consumption will be slightly higher depending on the length of the connecting cable. |
| Dimensions (W × L × H) | 366 × 280 × 207 mm |
| Antenna gain | 23 dBi |
| Antenna beam width | 9° (horizontal), 7° (vertical) |
| Protection | Electrostatic discharge protection up to 15 kV Lightning strike protection up to 6 kV |
| Body | Material: Stabilized plastic for outdoor use Weatherproof: IP65 certified for moisture and dust protection |
| WI-FI SETTINGS | |
|---|---|
| Wi-Fi Standards | IEEE 802.11a/n |
| Custom protocol | TDMA mode (with Pharos MAXtream enabled) |
| Wireless data transfer rate | Up to 300 Mbit/s (40 MHz, dynamic) Up to 144.4 Mbit/s (20 MHz, dynamic) Up to 72.2 Mbit/s (10 MHz, dynamic) Up to 36.1 Mbit/s (5 MHz, dynamic) |
| Frequency ranges | 5.15-5.85 GHz Note: The available operating frequencies may vary depending on the restrictions of the country or region in which the device is used. |
| EIIM | < 20 dBm or < 100 MW |
| Software Features | |
|---|---|
| Operating modes | access point, client, access point with router, access point and client-router (WISP wireless client) |
| Network Settings | WAN: Static/Dynamic/PPPoE/L2TP / PPTP LAN: Static/Dynamic / DHCP Forwarding: DMZ / ALG/UPnP / Virtual Server / Port Trigger Security: SPI Firewall / Ping Packet Denial/VPN/DoS Protection Access Control Static Routing Bandwidth Control IP and MAC Address Binding |
| Wireless Mode Settings | Pharos MAXtream TDMA technology Channel width selection: 5/10/20/40 MHz Automatic channel selection Transmission power control Dynamic Frequency Selection (DFS) Enable / Disable WDS Security: WPA/WPA2 encryption, WPA-PSK/WPA2-PSK (AES/TKIP), 64/128/152-bit WEP encryption Enable / Disable Multi-SSID broadcast with VLAN tagging (access point mode only) Configuring Distance/ACK Timeout MAC Address Filtering Additional Wireless Mode Settings: Beacon Interval/RTS Threshold/ Fragmentation Threshold /DTIM Interval/Access Point Isolation/Short GI/Wi-Fi Multimedia |
| Management | Search and remote management using Pharos Control HTTP / HTTPS Web Configuration Utilities Syslog SNMP Agent (v2c) Ping Watch Dog Dynamic DDNS SSH Server |
| System tools | Indicators: Signal/Noise Level/CCQ Transmission/Processor/Memory Monitoring: Throughput capacity/Customers/Interfaces / ARP / Routes/WAN/DHCP Spectrum Analysis Ping Speed Check Tracing |
| System-level optimization | Optimized IGMP Snooping / Proxy for Multicast Groups Watchdog Timer |
| PoE Adapter Specifications | |
|---|---|
| Dimensions (W × L × H) | 85.8 × 43.9 × 29.7 mm |
| Interfaces | 1 ground pin 1 10/100 Mbps shielded Ethernet port (power + data) 1 10/100 Mbps shielded Ethernet port (data) |
| Buttons | Remote Reset |
| LED Power Indicators | Green |
| Input power | 100-240 VAC, 50/60 Hz |
| Output current | 24 VDC, 0.5 A Max +: Pins 4, 5; –: Pins 7, 8. (Support PoE up to 60m). |
| Efficiency | > 84,29 % |
| Certification process | CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark |
| Other | |
|---|---|
| Certification process | CE, FCC, RoHS, IP65 |
| Scope of delivery | Outdoor Wireless Access Point 24V 0.5 A Passive PoE Adapter Mast Mount Kit Power Cable Installation Guide |
| System requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ или Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. Note: For a better user experience, we recommend that you use one of the following web browsers: Google Chrome, Safari, and Firefox. It is not recommended to use Internet Explorer web browsers. |
| Environmental parameters | Operating temperature: -40°C~70°C Storage temperature: -40°C~70 ° C Operating humidity: 10%~90%, non-condensing Storage humidity: 5%~95%, non-condensing |





