Price
116.00 azn
In stock
22 Pc
Hikvision Switch DS-3E1510P-EI/M
DS-3E1510P-EI/M 8-Port Gigabit Smart PoE Switch
8 × Gigabit PoE ports, 2 × Gigabit RJ45 ports
Total PoE Power Budget 60W
Supports 802.1Q VLAN
Supports PoE controller to detect and restart unresponsive cameras
Supports STP/RSTP Loopback Prevention
Long-range PoE Transmission up to 300m
6KV Surge Protection
| Port Number | 8 Port |
| Port speed | 100mbp/s |
| PoE | PoE |
| PoE power | 65 W |
| Type | Managed |
Detailed
| Model | DS-3E1510P-EI/M |
| Dimensions | 217.6 mm x 27.6 mm x 108.5 mm |
| Shell | Metal Material |
| Power Supply | 54VDC, 1.2A |
| Installation Mode | Desk-Mounted,Wall-Mounted |
| Max. Power Consumption | 65 W |
| Power Consumption in Idle | 2.5 W |
| Surge Protection | 6 KV |
| Ports | 8 × Gigabit PoE port,2 × Gigabit RJ45 port |
| MAC Address Table | 4 K |
| Switching Capacity | 20 Gbps |
| Packet Forwarding Rate | 14.88 Mpps |
| Internal Cache | 1.5 Mbits |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | End-span: 1/2(-), 3/6(+) |
| PoE Port | PoE: Ports 1 to 8 |
| Max. Port Power | 30 W |
| PoE Power Budget | 60 W |
| Long Range |
Ports 1 to 8: up to 300 m Long range performance may vary depend on camera model or cable condition |
| Port Isolation |
Ports 1 to 8: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group |
| PoE Watchdog | Ports 1 to 8: auto detect and restart the cameras that do not respond |
| HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate 2. Display the port bandwidth utilization rate 3. Display the PoE power usage 4. Display topology information 5. Display the alarm status 6. Restart ports and devices 7. Enable port long-rage mode 8. Remotely upgrade the device |
| System Maintenance |
Support device management via web Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses Support Super IP, which is a fixed IP address (10.180.190.200) for direct access Support management via Hik-Central Pro Support remote management via Hik-Partner Pro Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected Supports 802.1ab LLDP for peer device discovery Support port mirroring for fault locating |
| EMC |
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety |
CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry |
Reach (Regulation (EC) No.1907/2006),WEEE (2012/19/EU),CE-RoHS (2011/65/EU) |
