Price
450.00 azn
In stock
16 Pc
Hikvision Switch DS-3E1526P-EI/M
DS-3E1526P-EI/M 24 Port Gigabit Smart POE Switch
24 x gigabit PoE RJ45 ports, 1 x gigabit RJ45 port, 1 x gigabit fiber optical port
Total PoE power budget 230 W
Unified cloud management for security systems
Network topology at your fingertips
Remote troubleshooting
Visualized topology management
Up to 300 m long-range PoE transmission
6 kV surge protection
| Port Number | 24 Port |
| Port speed | 1000mbp/s |
| PoE | PoE |
| PoE power | 250 W |
| Type | Managed |
Detailed
| Model | DS-3E1526P-EI/M |
| Dimensions | 440.0 mm x 220.8 mm x 44.0 mm |
| Shell | Metal Material |
| Power Supply | 100~240 VAC, 50/60 Hz, Max. 4 A |
| Installation Mode | Rack (equipped with mounting ears) |
| Max. Power Consumption | 250 W |
| Power Consumption in Idle | 30 W |
| Surge Protection | 6 KV |
| Ports | 24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port |
| MAC Address Table | 8 K |
| Switching Capacity | 56 Gbps |
| Packet Forwarding Rate | 41.66 Mpps |
| Internal Cache | 4.1 Mbits |
| PoE Standard | IEEE 802.3af,IEEE 802.3at |
| PoE Power Pin | 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
| PoE Port | PoE: Ports 1 to 24 |
| Max. Port Power | 30 W |
| PoE Power Budget | 230 W |
| Long Range |
Ports 1 to 24: up to 300 m Long range performance may vary depend on camera model or cable condition |
| Port Isolation |
Ports 1 to 24: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group |
| PoE Watchdog | Ports 1 to 24: auto detect and restart the cameras that do not respond |
| HPP |
Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate 2. Display the port bandwidth utilization rate 3. Display the PoE power usage 4. Display topology information 5. Display the alarm status 6. Restart ports and devices 7. Enable port long-rage mode 8. Remotely upgrade the device |
| System Maintenance |
Support device management via web Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses Support Super IP, which is a fixed IP address (10.180.190.200) for direct access Support remote management via Hik-Partner Pro Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected Support 802.1ab LLDP for peer device discovery Support port mirroring for fault locating |
| EMC | CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) |
| Safety | CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017) |
| Chemistry |
CE-RoHS (201165EU); WEEE (201219EU); Reach (Regulation (EC) No.19072006) |
